US Forge Welding Electrode E6011 3/32-Inch by 14-Inch 5-Pound Box #51123 Review

Average Reviews:

(More customer reviews)I'm fairly new to welding so I don't know all the minute details of how a rod should flow etc. I do know that all my welds have held well and have not had any problems with cracking or porosity. Plus the rods are made in the USA!

Click Here to see more reviews about: US Forge Welding Electrode E6011 3/32-Inch by 14-Inch 5-Pound Box #51123

Offers ease-of-use weldability and forgiving qualities that occasional welders need. Each rod is printed with its AWS classification for easy identification. For deep penetration of dirty and oil soaked material. Can be positioned flat, horizontal, vertical or overhead. Coated with cellulose potassium for AC or DCEP current. 60 CD tensile strength.

Click here for more information about US Forge Welding Electrode E6011 3/32-Inch by 14-Inch 5-Pound Box #51123

Read More...

ArcOne G-HOL-A1501 Hollywood Safety Goggles Review

Average Reviews:

(More customer reviews)These safety glasses (which also come with a strap if you prefer goggles) look great and thanks to the foam around the perimeter of the lens they also form a good seal to keep debris away. I use mine primarily for when I'm riding my John Deere as grass clippings can blow around when we have much wind. The lens has a slight green tint as these were designed for welding but they can serve many other purposes as well. I prefer to wear them as glasses and they fit nicely with ear protection on- some glasses stick out and can prevent ear cups from sealing tight.

Click Here to see more reviews about: ArcOne G-HOL-A1501 Hollywood Safety Goggles

Click here for more information about ArcOne G-HOL-A1501 Hollywood Safety Goggles

Read More...

Hobart 770023 Welding Receptacle 230 Volt Crow Foot Review

Average Reviews:

(More customer reviews)Beware! This product is not as described. The picture shown is incorrect for this product. The grounding lug is not as shown in the illustration.

Click Here to see more reviews about: Hobart 770023 Welding Receptacle 230 Volt Crow Foot

Primary Power 50-Amp, 230-Volt Crowfoot-Type Wall Receptacle.Primary power 50-Amp230 VoltCrowfoot type wall receptacle

Click here for more information about Hobart 770023 Welding Receptacle 230 Volt Crow Foot

Read More...

US Forge Welding Malleable Iron C-Clamp 4-Inch Review

Average Reviews:

(More customer reviews)This is a good quality clamp and the only problem I was able to see out of four
clamps I ordered, was the screw pad on one of them was not machined off correctly and is not flush.

Click Here to see more reviews about: US Forge Welding Malleable Iron C-Clamp 4-Inch

Click here for more information about US Forge Welding Malleable Iron C-Clamp 4-Inch

Read More...

Hobart 176655 Welding Electrode 25 Amp Review

Average Reviews:

(More customer reviews)I ordered a package of 5 tips and a package of 5 electrodes. I received a package with one tip in it, and a package that stated it contained an electrode, however it also contained 1 tip.
After several calls to Amazon they happily refunded my $, however that isn't what I really wanted. I wanted 5 tips and 5 electrodes. They were not able to provide them to me.
Understand that when you order either of these items you will most likely receive only 1, not a package of 5. And... you may get a package that should contain an electrode, and it will probably contain a tip.
Thanks,
Steve

Click Here to see more reviews about: Hobart 176655 Welding Electrode 25 Amp

Miller Electric # 17665525 AMP electrodes ICE-25C & ICE-27C for Spectrum 375 and 375 X-treme.

Click here for more information about Hobart 176655 Welding Electrode 25 Amp

Read More...

Adjust Angle Welding Holder Review

Average Reviews:

(More customer reviews)This is very usefull for holding odd shapes at odd angles to be welded. I see only one potential problem and its when the nuts and bolts wear out and the whole thing starts to flex on its own but so far so good. I think that adding large wing nuts might be a better idea in the long run.
Update- I have used this magnet for a while now and I can say the following
- The magnets are way above average powerful
- The magnets are way above average powerful AND sometimes make removing them to readjust pieces a real hassle. This needs an on/off switch ;)
- The glue that holds the magnet between the two metal plates has come undone on one side causing further pains in the butt.
Despite all this it has been very useful and I would get another one.

Click Here to see more reviews about: Adjust Angle Welding Holder

Click here for more information about Adjust Angle Welding Holder

Read More...

US Forge Welding Flux-Cored MIG Wire .030 10-Pound Spool #00064 Review

Average Reviews:

(More customer reviews)This wire I've used for 3 years now in my Lincoln SP-135T and continue to purchase it. It is excellant for welding thin automotive body work with out burning through. It has very low splatter and produces clean welds. I would recommend it to anyone because of the quality and value.

Click Here to see more reviews about: US Forge Welding Flux-Cored MIG Wire .030 10-Pound Spool #00064

For gasless welding. With smooth, clean surface required for efficient wire feed. Minimal splatter, easy slag cleanup.

Get 24% OFF

Click here for more information about US Forge Welding Flux-Cored MIG Wire .030 10-Pound Spool #00064

Read More...